The Envirolet® Works-in-a-Drawer Box (120VAC Electric or 12VDC Battery) can be used in any Envirolet® System, including Waterless Self-Contained, Waterless Remote and Low Water Remote models.
Click on pictures to increase size. 120VAC model shown in larger picture, 12VDC shown in smaller inset.
• Includes rubber WID gasket.
• Blower Pipe hardware is also included, if you add optional Blower Pipe. The Blower Pipe is used to distribute air from Blower Fan downwards in System to aid in evaporation. Blower Pipe is required and should be added unless you already have one.
The Fans (2) in the 12VDC Battery version draw approximately 0.26 amps each. Battery not included.
In the 120VAC Electric version the Fans (2) are 20W each and the Heater is 500W. Heater is thermostatically controlled by 2 thermostats and stays on approximately 25% of the time.
Top Panels (12VDC or 120VAC) not included and must be purchased separately.
Note Regarding Older Systems:
It is recommended to occasionally inspect the WID Box in Envirolet® Systems that are more than 5-10 years old to make sure all components are in proper working order. WID Box replacement may be recommended for Systems that are 10-20 years old. Check with the Envirolet® Service Dept. if you have any questions.